Ali Stair Nosings

New Ali Wrap Nosing Flush. The Ali Wrap Nosing use a base material of aluminium for a high quality installation. The Ali Wrap Nosing is available for WPC 8mm and WPC/SPC 6.5mm Flush Pre-Drilled and countersunk at 100mm /4” centres and supplied with Spax-M self-drilling screws (Do not pre drill). Requires a T20 star bit. Fits to existing bullnose (overhang) tread without squaring off the nosing or building out the riser. Suitable for returns (mitres) Use Stycco Flex adhesive or similar. Use a Non expanding Construction Adhesive. Supplied with pre-attached adhesive tape for the LVT inlay. Install flooring into the recess by peeling off the top layer. May require heat. Choice of standard finishes: Ali Brass, Ali Antique, Ali Chrome & Ali Black Choice of length: 90cm (36"), 180 (71") and 270cm (106") Profile Size (Height of Flooring): 6.5mm and 8mm

New Ali Wrap Nosing Overlap. The Ali Wrap Nosing use a base material of aluminium for a high quality installation. The Ali Wrap Nosing is available for WPC 8mm and WPC/SPC 6.5mm Overlap (for the top step allowing expansion). Pre-Drilled and countersunk at 100mm/ 4” centres and supplied with Spax-M self-drilling screws (Do not pre drill). Requires a T20 star bit. Fits to existing bullnose (overhang) tread without squaring off the nosing or building out the riser. Suitable for returns (mitres) . Designed for 55/64” - 63/64” tread thickness. Use Stycco Flex adhesive or similar. Supplied with pre-attached adhesive tape for the LVT inlay. Install flooring into the recess by peeling off the top layer. Video below. May require heat. Choice of standard finishes: Ali Brass, Ali Antique, Ali Chrome & Ali Black Choice of length: 90cm (36"), 180 (71") and 270cm (106") Choice of profile: 6.5mm and 8mm

New Ali Wrap Nosing for LVT. The Ali Wrap Nosing for LVT use a base material of aluminium for a high quality installation. New Ali Wrap Nosing for LVT is available for 2.5mm or 3mm dryback (glue down) and requires 6mm plywood prep. Pre-Drilled and countersunk at 100mm/4” centres and supplied with Spax-M self-drilling screws (Do not pre drill). Requires a T20 star bit. Fits to existing bullnose (overhang) tread without squaring off the nosing or building out the riser. Suitable for returns (mitres) Video Below. Designed for 22mm - 25mm tread thickness. Use Stycco Flex adhesive or similar. Supplied with pre-attached adhesive tape for the LVT inlay. Install flooring into the recess. May require heat. Please see our fitting videos below Choice of standard finishes: Ali Brass, Ali Antique, Ali Chrome & Ali Black Choice of length: 90cm (36"), 180 (71") and 270cm (106")