Premier Single 13mm

Choice of standard finishes: Antique Brass, Antique Bronze, Brass, Satin Brass. Choice of specialised finishes: Brushed Chrome, Chrome, Pewter, Polished Nickel, Satin Nickel and Black. Choice of length: 90cm (36"), 180 (71") and 270cm (106")

Manufacturer: Stairrods

SKU: SR_S_13mm

Select Finish & Size *
Select Colour *

£37.99

Qty: decrease increase

The Premier Single 13 is a product suitable for use as an attractive carpet edge used when the carpet finishes over vinyl or in a situation where there is no flooring i.e. If the carpet ends on floorboards, this situation may occur on a staircase landing where the carpet runs along side an open balustrade. In these situations the Single 9 will give you an attractive, clean finish to your flooring.

Fitting

The Single 13 is used as a carpet edge for thin carpets i.e. flatweaves/mini boucle sisal products.

The Single 13 will ‘nap’ down to give the carpet a firm grip.

Use a block of wood wrapped in carpet and then gently hammer down.

The Single 13 is supplied with Easywedges to raise the base for double stick installations.

Care and Maintenance

Satin Brass and Polished Brass Trims: Lemon wipes will remove light tarnishing. However, to keep the brass looking like new these two finishes will need to be polished from time to time with a propriety brass polish. Ensure that you follow the instructions on the tin and protect your flooring during polishing.

Satin Nickel, Chrome, and Brushed Chrome: Lemon wipes will remove light tarnishing. These finishes will need to be polished from time to time with a propriety metal polish. Ensure that you follow the instructions on the tin and protect your flooring during polishing.

Pewter, Antique Bronze and Antique Brass: Lemon wipes will remove light tarnishing. If these finishes become contaminated and marked the only option is to polish them with a propriety metal polish and allow them to age again naturally. Ensure that you follow the instructions on the tin and protect your flooring during polishing.

Vacuum Cleaning. Only vacuum up to the trim edge then use the soft brush attachment to vacuum along the edge of the trim, if not, the steel base plate and plastic wheels of your vacuum cleaner will scratch and mark your Premier Trim.