New Ali Wrap Nosing Overlap.
The Ali Wrap Nosing use a base material of aluminium for a high quality installation.
The Ali Wrap Nosing is available for WPC 8mm and WPC/SPC 6.5mm Overlap (for the top step allowing expansion).
Pre-Drilled and countersunk at 100mm/ 4” centres and supplied with Spax-M self-drilling screws (Do not pre drill). Requires a T20 star bit.
Fits to existing bullnose (overhang) tread without squaring off the nosing or building out the riser. Suitable for returns (mitres) .
Designed for 55/64” - 63/64” tread thickness.
Use Stycco Flex adhesive or similar.
Supplied with pre-attached adhesive tape for the LVT inlay.
Install flooring into the recess by peeling off the top layer. Video below. May require heat.
Choice of standard finishes: Ali Brass, Ali Antique, Ali Chrome & Ali Black
Choice of length: 90cm (36"), 180 (71") and 270cm (106")
Choice of profile: 6.5mm and 8mm
New Ali Wrap Nosing for LVT.
The Ali Wrap Nosing for LVT use a base material of aluminium for a high quality installation.
New Ali Wrap Nosing for LVT is available for 2.5mm or 3mm dryback
(glue down) and requires 6mm plywood prep.
Pre-Drilled and countersunk at 100mm/4” centres and supplied with Spax-M self-drilling screws (Do not pre drill). Requires a T20 star bit.
Fits to existing bullnose (overhang) tread without squaring off the nosing or building out the riser. Suitable for returns (mitres) Video Below.
Designed for 22mm - 25mm tread thickness.
Use Stycco Flex adhesive or similar.
Supplied with pre-attached adhesive tape for the LVT inlay.
Install flooring into the recess. May require heat.
Please see our fitting videos below
Choice of standard finishes: Ali Brass, Ali Antique, Ali Chrome & Ali Black
Choice of length: 90cm (36"), 180 (71") and 270cm (106")
Choice of standard finishes: Antique Brass, Antique Bronze, Brass, Satin Brass.
Choice of specialised finishes: Brushed Chrome, Chrome, Pewter, Polished Nickel, Satin Nickel and Black
Choice of length: 90cm (36"), 180 (71") and 270cm (106")